Order Products : sales@su-jiao.com
EFRHATAN 86
| Category: | PUR-Ether , Polyurethane (Polyether based) |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | EFRHATAN |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mom3F5_EFRHATAN-86.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EFRHATAN 86 is a modified polyurethane (PUR). EFRHATAN 86 is ether based, it is suitable for technical sheathing. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.12 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 86 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 44.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 650 | % | ISO 527-2 |
| Abrasion Resistance | 36.0 | mm³ | DIN 53516 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cold Flexibility | -23 | °C | ISO 458 |
| Service Temperature | 80 | °C | |
| Thermal Stability | 1 | hr | ISO 182 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Resistance Against Saponification | < 200 | mg KOH/g | HD 22.10 S1 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | > 60 | kN/m | DIN 53515 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (100°C, 168 hr) | < 30 | % | UL 1581 |
| Change in Tensile Strain at Break in Air (100°C, 168 hr) | < 30 | % | UL 1581 |
| Change in Tensile Stress (18°C, 121 hr, in ASTM #2 Oil) | < 30 | % | UL 1581 |
| Change in Tensile Strain at Break (18°C, 121 hr, in ASTM #2 Oil) | < 30 | % | UL 1581 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-2 | UL 94 | |
| Oxygen Index | 25 | % | ISO 4589-2 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 | °C | |
| Drying Time | 3.0 to 6.0 | hr | |
| Cylinder Zone 1 Temp. | 150 | °C | |
| Cylinder Zone 2 Temp. | 160 | °C | |
| Cylinder Zone 3 Temp. | 175 | °C | |
| Cylinder Zone 4 Temp. | 185 | °C | |
| Cylinder Zone 5 Temp. | 200 | °C | |
| Die Temperature | 190 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Toughblend® PA66-1303 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | Nylon 6 | Toughblend® |
| Favorite LL515 | Favorite Plastics | LDPE+LLDPE | Favorite |
| Lupoy® 3030-15 | LG Chem Ltd. | PC | Lupoy® |
| Sylvin 6168-80 Grey 9439 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Petrothene® NA206000 (Injection Molding) | LyondellBasell Industries | LDPE | Petrothene® |
