Order Products : sales@su-jiao.com
raplan® HB 60-840
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | API SpA |
| Trademark: | raplan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mmepUg_raplan-HB-60-840.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| raplan®HB 60-840 is a styrene-butadiene-styrene block copolymer (SBS) product,. It can be processed by extrusion or injection molding and is available in Europe. Typical application areas are: consumer goods. The main characteristics are: copolymer. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.930 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 50 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.40 - 2.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 7.40 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 800 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 31.0 | kN/m | ASTM D624 |
| Additional Information |
|---|
| Abrasion Resistance, DIN 53516: 180 mm³ |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 150 | °C | |
| Middle Temperature | 170 | °C | |
| Front Temperature | 170 | °C | |
| Nozzle Temperature | 180 | °C | |
| Mold Temperature | 20.0 - 40.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Injection Pressure: Medium to HighBack Pressure: Low to MediumLocking Pressure: Medium to High |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 | °C | |
| Cylinder Zone 2 Temp. | 160 | °C | |
| Cylinder Zone 3 Temp. | 160 | °C | |
| Cylinder Zone 4 Temp. | 170 | °C |
| Extrusion instructions |
|---|
| L/D Ratio: 20/28Compression Ratio: 1:2.5 to 1:2.8 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Abstron IMG 1115 | Bhansali Engineering Polymers Limited | ABS | Abstron |
| Aplax P0413GN | Ginar Technology Co., LTD. | PP, Unspecified | Aplax |
| GLAMIDE® T-400G15 | TOYOBO America, Inc. | Nylon 6 | GLAMIDE® |
| ESTOPLAST XU 6100YY18R | Ester Industries Ltd. | Nylon 66 | ESTOPLAST XU |
| OTECH PVC OE9528 - Calendering | OTECH Corporation | PVC, Unspecified | OTECH PVC |
