Order Products : sales@su-jiao.com
ICORENE® N2102
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | ICO Polymers EMEA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mk5XfB_ICORENE-N2102.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® N2102 is a low density polyethylene resin suitable for general purposes. It is characterized by good toughness, stiffness and processability. It is succesfully used for injection moulding, compound and masterbatch applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 46 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 10.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 500 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 87.0 | °C | ASTM D1525 |
| Peak Melting Temperature | 106 | °C | ASTM D3418 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SAXATEC™ 4120 | SAX Polymers | ASA | SAXATEC™ |
| AEI SX559:CM540U | AEI Compounds Limited | XLPE | AEI |
| BESTNYL SE00VI01AT | Triesa Plastics | Nylon 66 | BESTNYL |
| Elastollan® Soft 35 AP | BASF Polyurethanes GmbH | TPU-Polyester | Elastollan® |
| Infino XI-4208 | SAMSUNG SDI CO., LTD. | Nylon, Unspecified | Infino |
