Order Products : sales@su-jiao.com
AXELERON™ CC 3485 NT CPD
| Category: | HDPE , High Density Polyethylene Cellular Insulation Compound |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | AXELERON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | megZ0H_AXELERON-CC-3485-NT-CPD.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
AXELERON™CC B- 3485 NT is a foamable, high molecular weight, high density polyethylene insulation material, specially used for foaming/skin single-core telephone lines. The material contains a chemical foaming agent, which can obtain a 50% foaming amount when temperature controlled extrusion processing is adopted. This highly stable product has excellent mechanical and electrical properties and is used in high-speed extrusion processing lines. Specification requirements: Under the conditions of adopting the correct commercial extruder extrusion processing specifications, use AXELERON™CC B- 3485 NT telephone line as insulating material should meet the requirements of the following specifications:
|
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 0.945 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 2(190°C/2.16 kg) | 0.85 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 3 | 22.1 | MPa | ASTM D638 |
| Tensile Elongation 4(Break) | 700 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat resistant stress crack- F0 | > 96 | hr | ASTM D2951 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | > 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Constant 5(1 MHz) | 2.34 | ASTM D1531 | |
| Dissipation Factor 6(1 MHz) | 3.0E-4 | ASTM D1531 |
| Extrusion instructions |
|---|
| 加工技巧AXELERON™ CC 3485 NT CPD 复合物通过温度控制的挤出方式发生膨胀。具体的挤出条件取决于挤塑机尺寸、槽的位置、导体预热、生产线速度和所需的膨胀程度。但是，只有已知应用方式和加工设备的类型时，才能给出加工条件的具体建议。 |
| Note Message | |
|---|---|
| 1 . | Solid |
| 2 . | Base resin |
| 3 . | Solid |
| 4 . | Solid |
| 5 . | Solid |
| 6 . | Solid |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARPOL® LL4M 820 | Marco Polo International, Inc. | LLDPE | MARPOL® |
| Starex BM-0320 J | SAMSUNG SDI CO., LTD. | ABS | Starex |
| DURACON® M25-45 | Polyplastics Co., Ltd. | Acetal (POM) Copolymer | DURACON® |
| PENTAMID AB S GV60 H natural | PENTAC Polymer GmbH | Nylon 66/6 | PENTAMID AB |
| CP PRYME® Nylon 6 N300HSL | Chase Plastics Services Inc. | Nylon 6 | CP PRYME® Nylon 6 |
