Order Products : sales@su-jiao.com

Santoprene™ 241-64

Category:	TPV , Thermoplastic Vulcanizate
Manufacturer:	ExxonMobil Chemical
Trademark:	Santoprene™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	me36EC_Santoprene-241-64.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

It is a soft, colorable, special thermoplastic vulcanized elastomer (T PV) in the thermoplastic elastomer (TPE) series. It is suitable for the pipeline engineering field related to drinking water, and also suitable for food processing equipment. This brand of Shanduping TPV is a shear rate dependent product that can be processed on conventional thermoplastic injection molding, extrusion molding or blow molding equipment. This is a polyolefin-based material that can be recycled in the production process.

General Information
Features	Good dimensional stability Low compressive deformability Flexibility at low temperatures Recyclable materials Good heat aging resistance Good coloring Ozone resistance Good chemical resistance Fatigue resistance
Uses	Pipe components
Agency Ratings	NSF 51 NSF 61 UL QMFZ2 UL QMFZ8
RoHS Compliance	RoHS compliance
UL File Number	E80017
Appearance	Natural color
Forms	Particle
Processing Method	Blow molding Multiple injection molding Co-extrusion molding Extrusion Extrusion blow molding Sheet extrusion molding Profile extrusion molding Injection blowing molding Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--	0.968	g/cm³	ASTM D792
--	0.970	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shaw A, 15 seconds, 23°C, 2.00mm)	69		ISO 868

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress - Across Flow (100% Strain, 23°C)	2.60	MPa	ASTM D412, ISO 37
Tensile Strength - Across Flow (Break, 23°C)	7.00	MPa	ASTM D412, ISO 37
Tensile Elongation - Across Flow (Break, 23°C)	450	%	ASTM D412, ISO 37
Compression Set
23°C, 168 hr ¹	18	%	ASTM D395B
100°C, 168 hr ²	48	%	ASTM D395B
23°C, 168 hr ³	18	%	ISO 815
100°C, 168 hr ⁴	48	%	ISO 815

Thermal	Nominal Value	Unit	Test Method
RTI Elec	100	°C	UL 746
RTI	90.0	°C	UL 746

Electrical	Nominal Value		Test Method
Comparative Tracking Index (CTI)	PLC 0		UL 746
High Amp Arc Ignition (HAI)	PLC 0		UL 746
High Voltage Arc Resistance to Ignition (HVAR)	PLC 6		UL 746
High Voltage Arc Tracking Rate (HVTR)	PLC 3		UL 746
Hot-wire Ignition (HWI)	PLC 2		UL 746

Flammability	Nominal Value		Test Method
Flame Rating			UL 94
1.00 mm	HB		UL 94
1.50 mm	HB		UL 94
3.00 mm	HB		UL 94

Additional Information
如果适用，这是基于扇形浇口注塑成型的平板测试结果。拉伸强度、伸长率和拉伸应力沿垂直流动方向测定 - ISO 1 型，ASTM die C。25% 形变时的永久压缩变形。从埃克森美孚欧洲分支机构直接购买的所有产品都符合 REACH 法规。对于埃克森美孚未进口至欧洲的产品，用户应自行评估其是否满足 REACH 法规。

Legal statement
有关详细的产品监管信息，请联系客户服务。未经埃克森美孚化工书面允许，这种产品包括其产品名称，不得在任何医疗应用领域予以使用或

Injection	Nominal Value	Unit
Drying Temperature	82.2	°C
Drying Time	3.0	hr
Suggested Max Moisture	0.080	%
Suggested Max Regrind	20	%
Rear Temperature	177	°C
Middle Temperature	182	°C
Front Temperature	182	°C
Nozzle Temperature	188 - 221	°C
Processing (Melt) Temp	193 - 232	°C
Mold Temperature	10.0 - 51.7	°C
Injection Rate	Fast
Back Pressure	0.345 - 0.689	MPa
Screw Speed	100 - 200	rpm
Clamp Tonnage	4.1 - 6.9	kN/cm²
Cushion	3.18 - 6.35	mm
Screw L/D Ratio	16.0:1.0 to 20.0:1.0
Screw Compression Ratio	2.0:1.0 to 2.5:1.0
Vent Depth	0.025	mm

Injection instructions
Santoprene TPV与乙缩醛和PVC不相容。更多关于加工和模具设计的信息，请查阅我们的《注射成型指南》。

Extrusion	Nominal Value	Unit
Drying Temperature	82.2	°C
Drying Time	3.0	hr
Melt Temperature	196	°C
Die Temperature	199	°C
Back Pressure	5.00 - 20.0	MPa

Extrusion instructions
Santoprene TPV与乙缩醛和PVC不相容。更多关于加工和模具设计的信息，请查阅我们的《挤出成型指南》。

Note Message
1 .	Type 1
2 .	Type 1
3 .	Type a
4 .	Type a

Resin Grade	Manufacturer	Category	Trademark
PrimaFlex® CP 0110	Plastic Solutions, Inc.	PP Impact Copolymer	PrimaFlex®
MEGOLON™ HF 8142 NATURAL	AlphaGary	TP, Unspecified	MEGOLON™
Braskem PE HC1828	Braskem	LLDPE	Braskem PE
LEXAN™ LUX2619 resin	SABIC Innovative Plastics	PC	LEXAN™
XENOY™ X5300WX resin	SABIC Innovative Plastics	PC+PBT	XENOY™