Order Products : sales@su-jiao.com
Delrin® Stock Shapes 570
| Category: | Acetal (POM) Homopolymer , Acetal (POM) Homopolymer |
| Manufacturer: | Ensinger Inc. |
| Trademark: | Delrin® Stock Shapes |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mcWERz_Delrin-Stock-Shapes-570.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DELRIN® 570 Shapes manufactured by Ensinger are 20% glass filled materials intended for general industrial use. The material offers very high stiffness, low warpage, and low creep for superior part performance under stress. DELRIN® 570 is used in a variety of industries such as automotive or construction where added strength and stiffness are desirable. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.56 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.15 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 81 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 4650 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 60.0 | MPa | ASTM D638 |
| Tensile Strain (Yield) | 8.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 43 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 155 | °C | ASTM D648 |
| Peak Melting Temperature | 175 | °C | ASTM D3418 |
| Service Temperature | |||
| Intermittent | 149 | °C | |
| Long Term | 85 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 2.0E+15 | ohms | ASTM D257 |
| Dielectric Strength (23°C, 3.20 mm) | 18 | kV/mm | ASTM D149 |
| Dielectric Constant (23°C, 1 MHz) | 3.80 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Additional Information |
|---|
| Data obtained from extruded shapes material. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecomid® NBX0 GR60 NL | Eurotec Engineering Plastics | Nylon 6 | Tecomid® |
| Novalloy-B B6508 | PlastxWorld Inc. | ABS+PBT | Novalloy-B |
| ASI POLYPROPYLENE PP 1255-01 | A. Schulman Inc. | PP Homopolymer | ASI POLYPROPYLENE |
| EstaGrip® ST 80A TPE | Lubrizol Advanced Materials, Inc. | TPU-Polyether | EstaGrip® |
| OmniCarb™ PC/PBT 400IM2 | OMNI Plastics, LLC | PC+PBT | OmniCarb™ |
