Order Products : sales@su-jiao.com
Ebalta MG 815-1 / MG 815
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Ebalta Kunststoff GmbH |
| Trademark: | Ebalta |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mXrnYY_Ebalta-MG-815-1-MG-815.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This product is a polyurethane system. Processing preferentially in standard vacuum casting plants. As moulding material we recommend our silicone casting compound Silastic® T4 0. Applications
Properties
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Molding Shrinkage | 0.30 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 77 to 83 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 62.0 to 72.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 8.5 to 13 | % | ISO 527-2 |
| Flexural Modulus | 1850 to 2350 | MPa | ISO 178 |
| Flexural Stress | 95.0 to 105 | MPa | ISO 178 |
| Compressive Stress | 85.0 to 95.0 | MPa | ISO 604 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 53 to 63 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 137 to 143 | °C | ISO 75-2/B |
| Glass Transition Temperature | 135 | °C | TMA |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 70 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Post Cure Time (100°C) | 2.0 | hr |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density (20°C) | 1.14 to 1.18 | g/cm³ | |
| Viscosity (25°C) | 0.58 to 0.78 | Pa·s | |
| Curing Time (70°C) | 0.67 to 1.0 | hr | |
| Pot Life 1(20°C) | 5.0 to 7.0 | min |
| Note Message | |
|---|---|
| 1 . | 200 g |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Matrixx FPP1A40CC | The Matrixx Group, Inc. | PP, Unspecified | Matrixx |
| TAIRIPRO S1005 | Formosa Plastics Corporation | PP Homopolymer | TAIRIPRO |
| TEREZ PA 6.6 HT 7500 GF 40 | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| Iupilon® MB2213R | Mitsubishi Engineering-Plastics Corp | PC+ABS | Iupilon® |
| Parylene C | Specialty Coating Systems (SCS) | PPX | Parylene |
