Order Products : sales@su-jiao.com
RTP 4782
| Category: | PTT , Polytrimethylene Terephthalate |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mXHSX3_RTP-4782.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.48 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 0.20 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 13100 | MPa | ASTM D638 |
| Tensile Strength | 136 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 1.7 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 11400 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 193 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 43 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 350 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 204 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 232 to 252 | °C | |
| Middle Temperature | 232 to 252 | °C | |
| Front Temperature | 232 to 252 | °C | |
| Mold Temperature | 88.0 to 121 | °C | |
| Injection Pressure | 69.0 to 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sumikon® EME-S020R | Sumitomo Bakelite Co., Ltd. | Epoxy | Sumikon® |
| Toughblend® PBT-1600 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | PBT | Toughblend® |
| GTPO™ 8102 | S&E Specialty Polymers, LLC | TPO (POE) | GTPO™ |
| Optix® CA-1000 E | Plaskolite West, Inc. | Acrylic (PMMA) | Optix® |
| HDPE NG 7000 H | The Dow Chemical Company | HDPE | HDPE |
