Order Products : sales@su-jiao.com
RTP 4006 FR
| Category: | PPA , Polyphthalamide |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mWxSF4_RTP-4006-FR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.70 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | ASTM D955 | ||
| 3.18mm, injection molding | 0.20 | % | ASTM D955 |
| 6.35mm, injection molding | 0.30 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.20 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 18600 | MPa | ASTM D638 |
| Tensile Strength | 134 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 1.5 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 13800 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 200 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 53 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 480 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 268 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.800 mm) | V-0 | UL 94 |
| Additional Information |
|---|
| The value listed as Flammibility, UL 94, was tested in accordance with RTP Company methods. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 296 - 324 | °C | |
| Middle Temperature | 296 - 324 | °C | |
| Front Temperature | 296 - 324 | °C | |
| Mold Temperature | 135 - 163 | °C | |
| Injection Pressure | 69.0 - 124 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 199 X 85860 B | RTP Company | PP, Unspecified | RTP |
| Resinext PC18RU | Southland Polymers | PC | Resinext |
| Shinkolite PX | Mitsubishi Rayon Co., Ltd. | Acrylic (PMMA) | Shinkolite |
| Lucofin® 1414-t3 | Lucobit AG | Polyolefin, Unspecified | Lucofin® |
| Sylvin 83031-70 Grey 9601 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
