Order Products : sales@su-jiao.com
Shinko-Lac® ASA TA-15W
| Category: | ASA+PC , Acrylonitrile Styrene Acrylate + PC |
| Manufacturer: | Mitsubishi Rayon America Inc. |
| Trademark: | Shinko-Lac® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mWlBpu_Shinko-Lac-ASA-TA-15W.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Shinko-Lac® ASA TA-15W is an Acrylonitrile Styrene Acrylate + PC (ASA+PC) material. It is available in North America for injection molding. |
| General Information | |
|---|---|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.60 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 54.9 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 2650 | MPa | ASTM D790 |
| Flexural Strength (Yield, 23°C) | 89.2 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 590 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 6.35 mm, Injection Molded | 115 | °C | |
| 1.8 MPa, Unannealed, 6.35 mm, Injection Molded | 105 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCANBLEND FS7 FR UV | Polykemi AB | ASA+PC | SCANBLEND |
| Tecoform® PO30 GB20 NL HS | Eurotec Engineering Plastics | Acetal (POM) Copolymer | Tecoform® |
| CGPC PVC H-61 | China General Plastics Corporation | PVC, Unspecified | CGPC PVC |
| Idemitsu PS NS-250 | Idemitsu PS | PS (HIPS) | Idemitsu PS |
| Karina BLACK PVC COMPOUND 795D48/1-B-IS-SD-GF (*) | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
