Order Products : sales@su-jiao.com
Generic PI, TP - Carbon Fiber
| Category: | PI, TP , Thermoplastic Polyimide |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mUE55L_Generic-PI-TP---Carbon-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PI, TP - Carbon Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.42 - 1.46 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.055 - 0.20 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 109 - 241 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 6690 - 25500 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 259 - 345 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 80 - 110 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 180 - 205 | °C | |
| Drying Time | 3.5 - 7.6 | hr | |
| Mold Temperature | 185 - 205 | °C | |
| Injection Pressure | 165 - 166 | MPa |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PI, TP - Carbon FiberThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Silamid® EFXSV10 | Roonamid a.s. | Nylon 6 | Silamid® |
| TABOND 2005 | SILON s.ro | POP | TABOND |
| Epoxies, Ect. 50-2366 FR | Epoxies, Etc. | PUR, Unspecified | Epoxies, Ect. |
| Petrothene® LT570401 | LyondellBasell Industries | HDPE | Petrothene® |
| apigo bio® CA 90 | API SpA | TPO (POE) | apigo bio® |
