Order Products : sales@su-jiao.com
SILVER® PE 1011.RDH
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Guangdong Silver Age Sci & Tech. Co., Ltd |
| Trademark: | SILVER® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mTpRDK_SILVER-PE-1011-RDH.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SlLVER® Modified Polyolefin includes modified polyethylene and modified polypropylene. Modified polyethylene is mainly applied to cable jacket. Black polyethylene compound is composed of polyethylene resin,carbon black, antioxidantand so on. Black polyehylene compound is applied to communication cable,contoll cable,signal cable,power cable,opticalcable and submarine cable. It conforms to GB15065-94 Standard. Modified PP including flame resistant, glass fiber andmineral reinforced and weather—resistant, is widely applied in electronic & electrical appliances, household appliances, autoaccessories, lightings, mechanical components and sockets, and so on. In addition, we develop new products according to customer's specific requirements. Characteristics:
Applications:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 0.918 to 0.938 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | < 2.0 | g/10 min | |
| Environmental Stress-Cracking Resistance (F0) | > 96.0 | hr | |
| Carbon Black Content | 2.4 to 2.9 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Oxidation Induction Time (200°C) | > 30 | min |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Extruder Screw L/D Ratio | 22.0:1.0 to 26.0:1.0 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | > 13.0 | MPa | |
| Tensile Elongation 1(Break) | > 500 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Brittleness Temperature | < -76.0 | °C |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Volume Resistivity | > 1.0E+6 | ohms·cm | |
| Dielectric Strength | > 25 | kV/mm | |
| Dielectric Constant (1 MHz) | < 2.80 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Cylinder Zone 1 Temp. | 160 to 165 | °C | |
| Cylinder Zone 3 Temp. | 165 to 170 | °C | |
| Cylinder Zone 5 Temp. | 170 to 175 | °C | |
| Die Temperature | 175 to 185 | °C |
| Note Message | |
|---|---|
| 1 . | 100 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Toughblend® PBT-1600 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | PBT | Toughblend® |
| TULAMID® PA-TM20 | UCC Shchekinoazot | Nylon 6 | TULAMID® |
| HiFill® ABS GF30 A1 | Techmer Engineered Solutions | ABS | HiFill® |
| Indothene LL 36RA045 | Reliance Industries Limited | LLDPE | Indothene LL |
| LNP™ THERMOCOMP™ IF008 compound | SABIC Innovative Plastics | Nylon 612 | LNP™ THERMOCOMP™ |
