Order Products : sales@su-jiao.com
Silplus® 70 MP
| Category: | Silicone Rubber, HTV , Silicone Rubber, HTV |
| Manufacturer: | Momentive Performance Materials Inc. |
| Trademark: | Silplus® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mQUoEw_Silplus-70-MP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Silplus 70 MP is a heat cured elastomer with outstanding processing capability. Silplus 70 MP heat cured elastomer when properly compounded and catalyzed may be considered for use in a wide variety of applications such as extrusion, molding and calendaring. Key Features and Benefits
Potential Applications Because of its outstanding properties, Silplus 70 MP heat cured elastomer is an excellent candidate to consider for use in most types of molding, extrusion and calendaring applications. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| UL File Number |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Mooney Viscosity (25°C) | 54 | MU | DIN 53523 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 70 | DIN 53505 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 11.0 | MPa | DIN 53504 |
| Tensile Elongation (Break) | 420 | % | DIN 53504 |
| Tear Strength 1 | 30.0 | kN/m | ASTM D624 |
| Compression Set (175°C, 22 hr) | 20 | % | ISO 815 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vulcanization (170°C) | 10.0 | min | |
| 100 (pbw) Silplus 70 MP heat cured elastomer with 0.4 (pbw) like 2,5-Dimethyl-2,5-di(tert.butylperoxy)hexane (100%). |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.21 | g/cm³ | DIN 53479 |
| Note Message | |
|---|---|
| 1 . | B mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL STAR™ S 60G1 V30 NATURAL | Solvay Engineering Plastics | Nylon 6 | TECHNYL STAR™ |
| DOW™ HDPE DGDA-2484 NT | The Dow Chemical Company | HDPE | DOW™ HDPE |
| Polyrocks EP8400X105V-2 | Polyrocks Chemical Co., Ltd | XLPE | Polyrocks |
| SQUARE® SSR8630-50AF/BF | Shenzhen SQUARE Silicone Co., Ltd. | Silicone | SQUARE® |
| ULTEM™ foam XP080 | SABIC Innovative Plastics | PEI | ULTEM™ foam |
