Order Products : sales@su-jiao.com
Braskem PE CP 396XP
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mP4vUZ_BraskemPECP396XP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CP 396XP is a heterophasic copolymer designed for injection process, with high balance of processability, stiffness and impact resistance. Applications: Injection parts with high balance of stiffness and impact; Compounds. Processing: Injection Molding |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.895 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 11 | g/10 min | ASTM D1238, ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | |||
| R grade, injection molding | 51 | ASTM D785 | |
| R scale 1 | 55 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | |||
| Yield, injection molding | 17.0 | MPa | ASTM D638 |
| Yield, injection molding | 19.0 | MPa | ISO 527-2 |
| Tensile Elongation | |||
| Yield, injection molding | 19 | % | ASTM D638 |
| Yield, injection molding | 6.0 | % | ISO 527-2 |
| Flexural Modulus - 1% Secant | |||
| Injection Molding | 850 | MPa | ASTM D790 |
| Injection Molding | 950 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| -20°C, injection molding | 90 | J/m | ASTM D256 |
| 23°C, injection molding | > 400 | J/m | ASTM D256 |
| -20°C, injection molding | 9.0 | kJ/m² | ISO 180 |
| 23°C, injection molding | 48 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, unannealed, injection molded | 85.0 | °C | ASTM D648 |
| 0.45 MPa, not annealed | 66.0 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 49.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 140 | °C | ISO 306/A |
| Note Message | |
|---|---|
| 1 . | Injection Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UBESTA 3030 JIX44 | UBE Engineering Plastics, S.A. | Nylon 12 | UBESTA |
| ACCUTECH™ POL051G30L | ACLO Compounders Inc. | PC | ACCUTECH™ |
| CERTENE™ HPB-0354Z | Muehlstein | HDPE | CERTENE™ |
| Hyundai EP Adhesives MP300JB/1002 | HYUNDAI EP Co., Ltd. | PE, Unspecified | Hyundai EP Adhesives |
| Plaslube® PA6/6,6 L N | Techmer Engineered Solutions | Nylon 66/6 | Plaslube® |
