Order Products : sales@su-jiao.com
INLUBE INX-TPU-05140
| Category: | TPU, Unspecified , Thermoplastic Polyurethane Elastomer |
| Manufacturer: | Infinity LTL Engineered Compounds |
| Trademark: | INLUBE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mNolmw_INLUBE-INX-TPU-05140.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PTFE/SILICONE LUBRICATED TPU |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.70 to 1.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 85 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 18.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 40 | % | ASTM D638 |
| Flexural Modulus | 41.4 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 32.2 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+17 | ohms | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 93.3 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 188 to 213 | °C | |
| Middle Temperature | 188 to 213 | °C | |
| Front Temperature | 188 to 213 | °C | |
| Processing (Melt) Temp | 210 | °C | |
| Mold Temperature | 15.6 to 37.8 | °C | |
| Back Pressure | 0.345 to 0.689 | MPa | |
| Screw Speed | 40 to 70 | rpm | |
| Vent Depth | 0.025 to 0.051 | mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TABOREN PH 92 H 15 | SILON s.ro | PP Homopolymer | TABOREN |
| Electrafil® ABS 04002 BK | Techmer Engineered Solutions | ABS | Electrafil® |
| HiFill® PA6/6 G/CF20 IM HS BK | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| LEXAN™ HFD1433 resin | SABIC Innovative Plastics | PC | LEXAN™ |
| Plenco 01586 (Injection) | Plastics Engineering Co. | Polyester, TS | Plenco |
