Order Products : sales@su-jiao.com
RTP 1500.5-50D
| Category: | TEEE , Thermoplastic Elastomer, Ether-Ester |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mLSdqG_RTP-1500-5-50D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Glass Fiber |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.43 - 0.53 | % | ASTM D955 |
| Moisture Content | % |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Primary Additive | 5.0 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 414 | MPa | ASTM D638 |
| Tensile Strength | 17.1 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | > 10 | % | ASTM D638 |
| Flexural Modulus | 345 | MPa | ASTM D790 |
| Flexural Strength | 12.1 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.20 mm) | 350 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.20 mm) | 410 | J/m | ASTM D4812 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 210 - 238 | °C | |
| Mold Temperature | 21.1 - 37.8 | °C | |
| Injection Pressure | 68.9 - 103 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 300 HF TFE 15 | RTP Company | PC | RTP |
| NPC PE LL0209AF | NPC Alliance Corporation | LLDPE | NPC PE |
| Hanwha Total PE R901P | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | HDPE | Hanwha Total PE |
| Sylvin 8377-75UV Yellow 4209 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| EPAMOULD 685A26 | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
