Order Products : sales@su-jiao.com
Cosmic DAP ID-40
| Category: | DAP , Diallyl Phthalate |
| Manufacturer: | Cosmic Plastics, Inc. |
| Trademark: | Cosmic DAP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mLKwUw_Cosmic-DAP-ID-40.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DESCRIPTION Cosmic ID-40 is an orlon filled, general purpose diallyl ortho phthalate molding compound which is supplied in a granular form. It molds easily in standard compression or transfer equipment. FEATURES It has excellent electrical properties and is unaffected by prolonged exposure to elevated temperature and 100% humidity. It is also resistant to solvents, acids, and alkalies. It has good flexural, compressive and tensile strength, and excellent post-mold shrinkage when compared to other orlon molding compounds. APPLICATIONS High resistance to impact and shock makes it an excellent material for terminal and printed circuit boards, connectors, or other applications requiring impact and/or shock tolerance. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.52 | g/cm³ | |
| Bulk Factor | 3.0 | ||
| Molding Shrinkage - Flow | 0.70 to 0.90 | % | |
| Dimensional Stability | < 0.070 | % | |
| Water Absorption 1(Equilibrium, 50°C) | 0.35 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 24.8 to 34.5 | MPa | |
| Flexural Strength | 55.2 to 86.2 | MPa | |
| Compressive Strength | 124 to 207 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Notched Izod Impact | 32 to 37 | J/m |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow (-40 to 100°C) | 4.2E-5 | cm/cm/°C | |
| Heat Distortion | 260 | °C |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Dielectric Breakdown | |||
| Dry | 60000 | V | |
| Wet | 45000 | V | |
| Surface Resistivity | |||
| -- 2 | 1.0E+10 | ohms | |
| -- 3 | > 1.0E+16 | ohms | |
| Volume Resistivity | |||
| -- 4 | 1.0E+10 | ohms·cm | |
| -- 5 | > 1.0E+16 | ohms·cm | |
| Dielectric Strength 6 | |||
| Dry | 14 | kV/mm | |
| Wet | 13 | kV/mm | |
| Dielectric Constant | |||
| 1 kHz 7 | 3.40 | ||
| 1 kHz 8 | 3.20 | ||
| 1 MHz 9 | 3.30 | ||
| 1 MHz 10 | 3.10 | ||
| Dissipation Factor | |||
| 1 kHz 11 | 0.020 | ||
| 1 MHz 12 | 0.018 | ||
| 1 MHz 13 | 0.013 | ||
| Arc Resistance | 100 | sec |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 135 to 190 | °C | |
| Injection Pressure | 3.45 to 55.2 | MPa |
| Note Message | |
|---|---|
| 1 . | 48 hrs |
| 2 . | 30 days @ 100% RH @ 70°C |
| 3 . | As Is |
| 4 . | 30 days @ 100% RH @ 70°C |
| 5 . | As Is |
| 6 . | Method B (Step-by-Step) |
| 7 . | Wet |
| 8 . | Dry |
| 9 . | Wet |
| 10 . | Dry |
| 11 . | Wet |
| 12 . | Wet |
| 13 . | Dry |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8697-82 Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Cheng Yu NGC3 | Cheng Yu Plastic Company Limited | Nylon 6 | Cheng Yu |
| Hax™ CAT 111 | Fainplast Compounds S.r.l | Polyolefin, Unspecified | Hax™ |
| Jackdaw ABS GR13BK6388 | Jackdaw Polymers | ABS | Jackdaw ABS |
| Sylvin 9710-80FUV Green 3146 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
