Order Products : sales@su-jiao.com
ResMart Ultra HIPS 5
| Category: | PS (HIPS) , High Impact Polystyrene |
| Manufacturer: | ResMart |
| Trademark: | ResMart Ultra |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mKwG8h_ResMart-Ultra-HIPS-5.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| General Purpose High Impact Polystyrene |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 5.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 99 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 32.4 | MPa | ASTM D638 |
| Flexural Modulus | 2170 | MPa | ASTM D790 |
| Flexural Strength | 47.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 110 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 80.0 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 76.7 | °C | |
| Drying Time - Desiccant Dryer | 2.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Processing (Melt) Temp | 210 - 246 | °C | |
| Mold Temperature | 51.7 - 68.3 | °C | |
| Injection Pressure | 68.9 - 96.5 | MPa |
| Injection instructions |
|---|
| Dew Point: 0°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Naxel PC40 | Custom Resins Group | PC | Naxel |
| Bergamid™ B700 G25 H | PolyOne Corporation | Nylon 6 | Bergamid™ |
| Aurora PVC AP3000 Series | Aurora Plastics, Inc. | PVC, Rigid | Aurora PVC |
| Koylene ADL AM650N | Reliance Industries Limited | PP Homopolymer | Koylene ADL |
| ULTEM™ 2200R resin | SABIC Innovative Plastics | PEI | ULTEM™ |
