Order Products : sales@su-jiao.com
ISOTHANE® 5080A
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Great Eastern Resins Industrial Co Ltd (GRECO) |
| Trademark: | ISOTHANE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mK0TF6_ISOTHANE-5080A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ISOTHANE 5080A product is an 82A, polyether based thermoplastic Polyurethanes. It exhibits excellent bio-compatibility, hydrolytic resistance, fungus resistance and low temperature performance properties. It can be injection molded, blow molded, and extruded. This product is used for biomedical and drug administration applications. Suggested Applications: Wound Dressing, Trans-dermal Patches, IV Bags, Catheter Parts, Medical Tubing and Surgical Gowns. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 82 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (H-22 Wheel) | 20.0 | mg | ASTM D1044 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 50% Strain | 3.60 | MPa | |
| 100% Strain | 5.40 | MPa | |
| 300% Strain | 10.0 | MPa | |
| Tensile Strength (Yield) | 37.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 620 | % | ASTM D412 |
| Tear Strength 1 | 80.0 | kN/m | ASTM D624 |
| Compression Set | ASTM D395B | ||
| 23°C, 22 hr | 25 | % | |
| 70°C, 22 hr | 30 | % |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 93.0 | °C | |
| Cylinder Zone 1 Temp. | 182 to 193 | °C | |
| Cylinder Zone 2 Temp. | 188 to 199 | °C | |
| Cylinder Zone 3 Temp. | 193 to 204 | °C | |
| Adapter Temperature | 193 to 204 | °C | |
| Die Temperature | 193 to 210 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARPOL® LL4F 802-SB | Marco Polo International, Inc. | LLDPE | MARPOL® |
| ADDINYL C2 V20 | ADDIPLAST | Nylon 66/6 | ADDINYL |
| Gallonprene® GP420-6503 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| GUR® 4130 | Celanese Corporation | UHMWPE | GUR® |
| LUBEXAN 1522 NATURAL | LUBEN PLAST srl | PC | LUBEXAN |
