Order Products : sales@su-jiao.com
Titanvene™ LL0214AA
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | PT. TITAN Petrokimia Nusantara |
| Trademark: | Titanvene™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mGG2CP_Titanvene-LL0214AA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Titanvene™ LL0214AA is a linear low density polyethylene suitable for a wide variety of extrusion coating applications with excellent draw-down, good seal ability, low neck-in and excellent adhesion properties. Titanvene™ LL0214AA has no slip and anti block additives (bare foot). Applications Titanvene™ LL0214AA is typically used for :
Recommended Processing Conditions Titanvene™ LL0214AA can be easily processed on normal polyethylene extrusion coating machines at temperatures in the range of 300°C to 325°C. Food Contact Compliance Titanvene™ LL0214AA can be used in food contact applications. Please contact your nearest PT. TITAN Petrokimia Nusantara representative for more detail of food contact compliance statements for the specific grade. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ISO 1183/D |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 14 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (10% Igepal, F50) | 300 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Elongation (Break) | 700 | % | ASTM D638 |
| Flexural Strength (Yield) | 9.81 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 94.0 | °C | ISO 306 |
| Melting Temperature (DSC) 1 | 120 | °C | ISO 3146 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 300 to 325 | °C | |
| Minimum Coating Weight | 7.0 | g/m² | |
| Neck-in | |||
| 315°C 2 | 58.0 | mm | |
| 315°C 3 | 47.0 | mm |
| Note Message | |
|---|---|
| 1 . | Method C |
| 2 . | Output 50 m/min |
| 3 . | 150 m/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen HP552L | LyondellBasell Industries | PP Homopolymer | Moplen |
| Hostacom TKC 235N | LyondellBasell Industries | PP Copolymer | Hostacom |
| Iupilon® EB-3001R | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
| Lupoy® SC2302 | LG Chem Ltd. | PC | Lupoy® |
| Paracril® 4880 | INSA | NBR | Paracril® |
