Order Products : sales@su-jiao.com
Diamond PC 1212 FR0 Black 1819
| Category: | PC , Polycarbonate |
| Manufacturer: | Network Polymers, Inc. |
| Trademark: | Diamond PC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mEiDRL_Diamond-PC-1212-FR0-Black-1819.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Diamond PC 1212 FR0 is a Polycarbonate (PC) product. It is available in North America. Characteristics include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.21 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 1(300°C/1.2 kg) | 20 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 to 0.70 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Injection Molded 2 | 62.1 | MPa | |
| Break, Injection Molded | 59.3 | MPa | |
| Flexural Modulus 3 | 2280 | MPa | ASTM D790B |
| Flexural Strength 4(Yield) | 90.3 | MPa | ASTM D790B |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 640 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 3.18 mm | 137 | °C | |
| 1.8 MPa, Unannealed, 3.18 mm | 132 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm | V-0 | ||
| 3.00 mm | 5VA |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 104 to 116 | °C | |
| Drying Time - Desiccant Dryer | 2.0 to 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Hopper Temperature | 249 to 282 | °C | |
| Rear Temperature | 260 to 293 | °C | |
| Middle Temperature | 260 to 293 | °C | |
| Front Temperature | 260 to 293 | °C | |
| Nozzle Temperature | 260 to 293 | °C | |
| Mold Temperature | 71.1 to 104 | °C | |
| Injection Pressure | 82.7 to 103 | MPa |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| 2 . | 51 mm/min |
| 3 . | Method I (3 point load), 1.3 mm/min |
| 4 . | Method I (3 point load), 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 66 T 40 | Plastcom | Nylon 66 | SLOVAMID® 66 |
| Tuftec™ M1913 | AKelastomers | SEBS | Tuftec™ |
| ADEKA BPX series | Adeka Corporation | PUR-Ether | ADEKA |
| Durolon® HFVR1900 CR010 | Unigel Plásticos | PC | Durolon® |
| Hipolyene 1703 MS HF | Zylog Plastalloys | TPO (POE) | Hipolyene |
