Order Products : sales@su-jiao.com

NuSil MED-6219

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	mDAaBc_NuSil-MED-6219.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days). Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties. LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfi lling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold. Comments: LOW VISCOSITY, HIGH DUROMETER

Message

NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).

Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties.

LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfi lling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold.

Comments: LOW VISCOSITY, HIGH DUROMETER

General Information
Features	Good Processability High Hardness Low Viscosity
Uses	Electrical/Electronic Applications Medical/Healthcare Applications
Agency Ratings	USP Class VI
Appearance	Clear/Transparent
Processing Method	Encapsulating Potting

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Density	1.07	g/cm³
Viscosity
-- ¹	20	Pa·s
-- ²	30	Pa·s
Curing Time (50°C)	2.0	hr
Pot Life (25°C)	120	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	78
Tensile Strength	8.27	MPa
Tensile Elongation at Break	65	%
Tear Strength	6.13	kN/m

Note Message
1 .	Part B
2 .	Part A

Resin Grade	Manufacturer	Category	Trademark
SABIC® LDPE 1808AF00	Saudi Basic Industries Corporation (SABIC)	LDPE	SABIC® LDPE
Vikalloy P51	Viking Polymers, LLC	PMMA+PVC	Vikalloy
Vyncolit® TEM 9053	Vyncolit N.V.	Epoxy	Vyncolit®
Hanwha Total PP CH72W	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	PP, High Crystal	Hanwha Total PP
Romiloy® 8170	ROMIRA GmbH	ASA+PC	Romiloy®