Order Products : sales@su-jiao.com
Nanguang TPU S-64DX
| Category: | TPU, Unspecified , Thermoplastic Polyurethane Elastomer |
| Manufacturer: | Fujian Nanguang Light Industry Co., Ltd. |
| Trademark: | Nanguang TPU |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mB4bwx_Nanguang-TPU-S-64DX.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Nanguang TPU S-64DX is a Thermoplastic Polyurethane Elastomer product. It can be processed by injection molding and is available in Asia Pacific. |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.19 to 1.23 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 62 to 66 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 60.0 | mg |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 15.2 | MPa | |
| 300% Strain | 49.0 | MPa | |
| Tensile Strength | 53.9 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 350 | % | ASTM D412 |
| Tear Strength (Split) | 180 | kN/m | ASTM D470 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 110 | °C | |
| Drying Time | 3.0 to 5.0 | hr | |
| Processing (Melt) Temp | 195 to 215 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| XANTAR® 27 R | Mitsubishi Engineering-Plastics Corp | PC | XANTAR® |
| NYLOY® NS-0100B-1 | Nytex Composites Co., Ltd. | Nylon 6 | NYLOY® |
| Hylon® N1000STHLUV2 | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
| Plasmer 7065N/1002 | HYUNDAI EP Co., Ltd. | TPE | Plasmer |
| Techsil® PU20940 | Techsil Limited | PUR, Unspecified | Techsil® |
