Order Products : sales@su-jiao.com
ESENTTIA 40H92
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Polipropileno del Caribe S.A. |
| Trademark: | ESENTTIA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | m8ePGO_ESENTTIA-40H92.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Characteristics: Control reologhy high melt flow rate Homopolymer polypropylene, easy mold filling, good stiffness/impact balance. Recommended for: Injection molding of thin wall rigid containers, fast cycle time, general purpose injection molding applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) 1(230°C/2.16 kg) | 40 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, 3.20 mm, Injection Molded) | 33.8 | MPa | ASTM D638 |
| Tensile Elongation 3(Yield, 3.20 mm, Injection Molded) | 10 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(3.20 mm, Injection Molded) | 1410 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm, Injection Molded) | 32 | J/m | ASTM D256A |
| Note Message | |
|---|---|
| 1 . | Procedure B |
| 2 . | Type I, 50 mm/min |
| 3 . | Type I, 50 mm/min |
| 4 . | Type I, 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VITAMIDE® BF23GY6610 | Jackdaw Polymers | Nylon 6 | VITAMIDE® |
| Osterlene® HE-3.0-2.0 | Osterman & Company | PS (HIPS) | Osterlene® |
| EPAMOULD EP90 | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
| Geon™ Vinyl Rigid Extrusion 87554E | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Extrusion |
| Romiloy® 4010 GF30 | ROMIRA GmbH | ABS+Nylon | Romiloy® |
