Order Products : sales@su-jiao.com
ENFLEX VU-420-55A
| Category: | PP+EPDM , Thermoplastic Vulcanizate |
| Manufacturer: | ENPLAST, a Ravago Group Company |
| Trademark: | ENFLEX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | m84h71_ENFLEXVU42055A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Economical, vulcanized EPDM/PP series |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.980 | g/cm³ | ISO 2781 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 55 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| 100% strain | 1.70 | MPa | ISO 37 |
| 300% strain | 3.10 | MPa | ISO 37 |
| Tensile Stress (Break) | 4.60 | MPa | ISO 37 |
| Tensile Elongation (Break) | 500 | % | ISO 37 |
| Tear Strength | 30 | kN/m | ISO 34-1 |
| Compression Set | ASTM D395B | ||
| 23°C, 22 hr | 20 | % | ASTM D395B |
| 70°C, 22 hr | 34 | % | ASTM D395B |
| 100°C, 22 hr | 45 | % | ASTM D395B |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (125°C, 336 hr) | 19 | % | ISO 188 |
| Change in Tensile Strain at Break in Air (125°C, 336 hr) | 16 | % | ISO 188 |
| Change in Shore Hardness in Air (Shore A, 125°C, 336 hr) | 7.0 | ISO 188 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -60.0 | °C | ISO 974 |
| Maximum Dynamic Service Temperature | 135 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2387 A | RTP Company | PUR, Unspecified | RTP |
| SAXALEN™ PPH305G30 | SAX Polymers | PP Homopolymer | SAXALEN™ |
| AEI SX-0612:CM601 | AEI Compounds Limited | XLPE | AEI |
| ALTECH® PA66 A 2015/710 GF15 IM | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
| Kingfa PP-V15 | Kingfa | PP, Unspecified | Kingfa |
