Order Products : sales@su-jiao.com
UBESTA 3035LU1
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | UBE America, Inc. |
| Trademark: | UBESTA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | m7nim5_UBESTA-3035LU1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
UBESTA 3035LU1 is a polyamide 12 (nylon 12) material,. This product is available in North America,. The main features of UBESTA 3035LU1 are:
The typical application areas of UBESTA 3035LU1 are: water pipes/pipes/drinking water |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (235°C/2.16 kg) | 1.3 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 112 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, 23°C | 46.0 | MPa | ASTM D638 |
| Fracture, 23°C | 56.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 250 | % | ASTM D638 |
| Flexural Modulus (23°C) | 1590 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 61.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 90 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 149 | °C | ASTM D648 |
| Melting Temperature | 178 | °C |
| Additional Information |
|---|
| The value listed as Melting Point was tested in accordance with ASTM D3418.Tensile Strength at Break, ASTM D638, 23°C: >56 MPaTensile Elongation at Break, ASTM D638, 23°C: >250% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Promyde® B30 P2 G40 MI | NUREL, S.A. | Nylon 6 | Promyde® |
| SUSTAMID 6 MO | Röchling Sustaplast SE & Co. KG | Nylon 6 | SUSTAMID |
| UNISOFT ADHESION™ AD-50A-NT-1-01 | UNITED SOFT PLASTICS, Inc. | SEBS | UNISOFT ADHESION™ |
| Epoxies, Ect. 20-2621 | Epoxies, Etc. | PUR, Unspecified | Epoxies, Ect. |
| Hetron™ F 240 TF | Ashland Performance Materials | Polyester, TS | Hetron™ |
