Order Products : sales@su-jiao.com
Daelim Po1y® TR-480SK
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | DAELIM INDUSTRIAL CO., LTD. |
| Trademark: | Daelim Po1y® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | m5i5fE_Daelim-Po1y-TR-480SK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PE/MRS 80 material according to ISO/TR 9080 SEM WQC approved for tap water as per BS 6920:1990 |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.945 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 0.58 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (F20) | > 1000 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 24.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 600 | % | ASTM D638 |
| Flexural Modulus | 883 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 6.00 mm) | No Break | ASTM D256 |
| Additional Information |
|---|
| Elongation at Break, ASTM D-638, 50 mm/min: >600%OIT, ASTM D3895, 200°C, Aluminum Pan: >40 min |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 190 - 220 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 800 TFE 20 EG | RTP Company | Acetal (POM) Copolymer | RTP |
| Multiuse Leostomer® LJ-3160N | Riken Technos Corp. | TPU, Unspecified | Multiuse Leostomer® |
| ALCUDIA® LDPE 2322M | REPSOL | LDPE | ALCUDIA® LDPE |
| KumhoSunny ABS HAG5210 | Shanghai KumhoSunny Plastics Co., Ltd. | ABS | KumhoSunny ABS |
| Pearlthane® 16N60D | Lubrizol Advanced Materials, Inc. | TPU-Polyether | Pearlthane® |
