Order Products : sales@su-jiao.com
KRATON® D1184 K
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | m3MDYW_KRATON-D1184-K.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1184 K is a clear, branched triblock copolymer based on styrene and butadiene, with a polystyrene content of 31%. It is supplied from North America in the physical form identified below.
Kraton D1184 K is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.940 | g/cm³ | ASTM D4025 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | < 1.0 | g/10 min | |
| Antioxidant Additive 1 | 0.15 to 0.40 | % | Internal Method |
| Ash Content | Internal Method | ||
| KIM | 4.0 to 6.0 | % | |
| KT, Talc | 0.10 to 0.30 | % | |
| Polystyrene Content | 29 to 33 | % | Internal Method |
| Solution Viscosity - Toluene, 15%wt (25°C) | 0.90 to 1.3 | Pa·s | Internal Method |
| Total Extractables | < 1.6 | % | Internal Method |
| Volatile Matter | < 1.0 | % | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Diblock Content | 16.0 | ||
| Styrene/Rubber ratio | 31/69 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec, Compression Molded) | 68 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 2(300% Strain) | 5.52 | MPa | ASTM D412 |
| Tensile Strength 3(Yield) | 27.6 | MPa | ASTM D412 |
| Tensile Elongation 4(Break) | 820 | % | ASTM D412 |
| Note Message | |
|---|---|
| 1 . | Non-staining phenolic antioxidant |
| 2 . | Measured on films cast from a solution in toluene |
| 3 . | Measured on films cast from a solution in toluene |
| 4 . | Measured on films cast from a solution in toluene |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Abstron KU650NH | Bhansali Engineering Polymers Limited | ABS | Abstron |
| EVALENE® LLDPE LJ20241 | JG Summit Petrochemical Corporation | LLDPE | EVALENE® LLDPE |
| DINALON® B1S25 MI-4109 | Grupo Repol | Nylon 6 | DINALON® |
| ExxonMobil™ LDPE LD 136.MN | ExxonMobil Chemical | LDPE | ExxonMobil™ LDPE |
| Devcon Epoxy Concrete Sealer | Devcon | Epoxy | Devcon |
