Order Products : sales@su-jiao.com
CERTENE™ LDI-2618
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | m3Gf0f_CERTENE-LDI-2618.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LDI-2618 is a certified prime grade designed for High-Flow INJECTION MOLDING applications. LDI-2618 features easy processability, good clarity, excellent flexibility and good surface appearance. LDI-2618 applications include housewares, lids, closures and general purpose molded articles. Recommended processing temperature is 170° to 220°C, with mold at 20° to 40°C. LDI-2618 complies with FDA regulation 21CFR 177.1520 (c) 2.1 and most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 26 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 11.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 120 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 238 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Instrumented Dart Impact | ASTM D3763 | ||
| -20°C | 16.3 | J | ASTM D3763 |
| 23°C | 19.0 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 84.0 | °C | ASTM D1525 |
| Additional Information |
|---|
| Test specimens from compression molded plaque according to ASTM D4703, Procedure C. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 170 - 220 | °C | |
| Mold Temperature | 20.0 - 40.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Silplus® 80 MP | Momentive Performance Materials Inc. | Silicone Rubber, HTV | Silplus® |
| SWANCOR Epoxy 977 | SWANCOR IND. CO., LTD. | Epoxy | SWANCOR Epoxy |
| GERMAMID 6 HSZ | Kunststoff-Kontor-Hamburg GmbH | Nylon 6 | GERMAMID |
| Hapflex™ 566-3 | Hapco Inc. | TP, Unspecified | Hapflex™ |
| Lion Idemitsu Composites PPS G131J1 | Lion Idemitsu Composites Co., Ltd. | PPS | Lion Idemitsu Composites PPS |
