Order Products : sales@su-jiao.com
THERMOLAST® K TC6FLN (Series: FR/AP)
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | KRAIBURG TPE |
| Trademark: | THERMOLAST® K |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | m1zdA1_THERMOLAST-K-TC6FLN-Series-FR-AP-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The FR/AP Series is your material solution for applications requiring high flame retardance. The compounds are halogen free and available in natural and black colors. Typical applications
Material advantages
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.13 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 58 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(Yield) | 2.90 | MPa | ISO 37 |
| Tensile Elongation 2(Break) | 600 | % | ISO 37 |
| Tear Strength 3 | 14 | kN/m | ISO 34-1 |
| Compression Set 4 | ISO 815 | ||
| 23°C, 72 hr | 20 | % | |
| 70°C, 24 hr | 63 | % | |
| 100°C, 24 hr | 93 | % |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.00 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 180 | °C | |
| Middle Temperature | 200 | °C | |
| Front Temperature | 220 | °C | |
| Mold Temperature | 25.0 to 40.0 | °C | |
| Injection Pressure | 20.0 to 100 | MPa | |
| Back Pressure | 2.00 to 10.0 | MPa |
| Note Message | |
|---|---|
| 1 . | Type S2, 200 mm/min |
| 2 . | Type S2, 200 mm/min |
| 3 . | Method Bb, Angle (Nicked) |
| 4 . | Method A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALTECH® PA66 A 2025/109 GF25 | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
| Anjacom® 250-H/GF30 | Almaak International GmbH | Nylon 6 | Anjacom® |
| Elastron® G G400.A40.N | Elastron USA, Inc. | SEBS | Elastron® G |
| LNP™ LUBRICOMP™ DFL44 compound | SABIC Innovative Plastics Europe | PC | LNP™ LUBRICOMP™ |
| POLYblend PC/ABS 85FS GF20 | Polykemi AB | PC+ABS | POLYblend |
