Order Products : sales@su-jiao.com

Extir® B 5000 AE

Category:	PS (EPS) , Expanded Polystyrene
Manufacturer:	Versalis S.p.A.
Trademark:	Extir®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	m1IP6O_Extir-B-5000-AE.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Extir B 5000 AE is a flame retardant expandable polystyrene in the form of spherical beads of medium-large particle size, containing pentane as blowing agent. Extir does not contain CFC or HCFC. Extir B 5000 AE is used for production of medium density blocks for the thermal insulation sector. This grade is characterised by fast moulding cycles, good fusion and low energy needs. The cut board exhibits high mechanical strength and good surface finishing. Extir B 5000 AE is used mainly in the construction sector where, for legislative or safety reasons, the use of a flame retardant material is required. Typical applications are: blocks, especially for external thermal insulation medium / high density elastified blocks for impact sound absorption (Trittschall) void formers, trough formers and culvert formers cut from block blocks or slabs for road foundations and civil construction

Message

Extir B 5000 AE is a flame retardant expandable polystyrene in the form of spherical beads of medium-large particle size, containing pentane as blowing agent. Extir does not contain CFC or HCFC.
Extir B 5000 AE is used for production of medium density blocks for the thermal insulation sector. This grade is characterised by fast moulding cycles, good fusion and low energy needs. The cut board exhibits high mechanical strength and good surface finishing.

Extir B 5000 AE is used mainly in the construction sector where, for legislative or safety reasons, the use of a flame retardant material is required.

Typical applications are:

blocks, especially for external thermal insulation

medium / high density elastified blocks for impact sound absorption (Trittschall)

void formers, trough formers and culvert formers cut from block

blocks or slabs for road foundations and civil construction

General Information
Additive	Blowing Agent 2 Flame Retardant
Features	Expandable Fast Molding Cycle Flame Retardant Good Strength Good Surface Finish Thermally Insulating
Uses	Acoustic Barrier Building Materials Construction Applications
Agency Ratings	DIN 4102/B1
Forms	Spheres

Physical	Nominal Value	Unit
Density	0.0160 to 0.0300	g/cm³
Apparent Density
-- ¹	0.02	g/cm³
--	0.59 to 0.63	g/cm³
Particle Size	0.900 to 1.60	mm

Note Message
1 .	on a continuous pre-expander after one expansion

Resin Grade	Manufacturer	Category	Trademark
Silplus® 80 MP	Momentive Performance Materials Inc.	Silicone Rubber, HTV	Silplus®
Nymax™ GF1200 A30 HS NC054 NEW	PolyOne Corporation	Nylon 66	Nymax™
Elvakon® 4452	Lucite International Inc.	Acrylic (PMMA)	Elvakon®
E-Pos 674X90	Epocat Nederland BV	Epoxy	E-Pos
Latamid 6 H2 G/30-V2HF	LATI S.p.A.	Nylon 6	Latamid