Order Products : sales@su-jiao.com

PPO™ 630 resin

Category:	PPE+PS , Polyphenylene Ether + PS
Manufacturer:	SABIC Innovative Plastics
Trademark:	PPO™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	lzoYDS_PPO-630-resin.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
PPO* 630 resin is a medium molecular weight polymer based on Polyphenylene Ether (PPE). PPO* is intended for use as an additive or a building block in a variety of thermoplastics and thermoplastic elastomers like Styrenic Block Copolymers. PPO* resin can be used to improve properties like Heat Distortion and Creep Resistance. It is hydrolytically stable and non-hydroscopic (typically less than 0.2% water uptake). The polymer is soluble in common organic solvents like toluene, chloroform, and THF. Chemical name: Poly (2,6-dimethyl-, 1,4-phenylene ether) (PPE) Formula: (C8H8O)n Regulatory Status: Complies with the FDA regulation 21CFR 177..2460. Also complies with EU Directive 2002/72/EC.

Message

PPO* 630 resin is a medium molecular weight polymer based on Polyphenylene Ether (PPE). PPO* is intended for use as an additive or a building block in a variety of thermoplastics and thermoplastic elastomers like Styrenic Block Copolymers. PPO* resin can be used to improve properties like Heat Distortion and Creep Resistance. It is hydrolytically stable and non-hydroscopic (typically less than 0.2% water uptake). The polymer is soluble in common organic solvents like toluene, chloroform, and THF. Chemical name: Poly (2,6-dimethyl-, 1,4-phenylene ether) (PPE) Formula: (C8H8O)n Regulatory Status: Complies with the FDA regulation 21CFR 177..2460. Also complies with EU Directive 2002/72/EC.

General Information
Features	Hydrolytically Stable Medium Molecular Weight
Uses	Additive
Agency Ratings	EU 2002/72/EC FDA 21 CFR 177.2460
Forms	Powder

Physical	Nominal Value	Unit	Test Method
Density ¹	0.462	g/cm³	ISO 1183
D	2.80		Internal Method
Intrinsic Viscosity	0.33	dl/g	Internal Method
Mean Particle Size	190.0	µm	Internal Method
Mn	17300		Internal Method
Mw	47600		Internal Method
Phenolic End-group Content	1180	ppm	Internal Method
Tg (half width)	214	°C	Internal Method

Additional Information	Nominal Value	Unit	Test Method
Toluene Content	< 1500	ppm	Internal Method

Note Message
1 .	Bulk Density

Resin Grade	Manufacturer	Category	Trademark
SCHULADUR® PCR GF 30	A. Schulman Europe	PBT+PET	SCHULADUR®
Tenopom® POM A3 HF NTLA010 PR307	Petropol Industry and Trade of Polymers LTDA	Acetal (POM) Homopolymer	Tenopom® POM
Synthos EPS® 2040F/CZ	Synthos S.A.	PS (EPS)	Synthos EPS®
LNP™ LUBRICOMP™ WL004 compound	SABIC Innovative Plastics	PBT	LNP™ LUBRICOMP™
Plexiglas® Satinice df20 8N	Evonik Industries AG	Acrylic (PMMA)	Plexiglas®