AT 418

Category: LDPE , Low Density Polyethylene
Manufacturer: Celanese EVA Performance Polymers
Trademark: AT
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: lx0nSO_AT-418.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
A low density polyethylene resin well suited for extrusion coating and lamination applications. This resin has excellent adhesion and low neck-in at high speeds.
General Information
Features
  • Good Adhesion
  • Low Neck-In
Uses
  • Coating Applications
  • Laminates
Agency Ratings
  • FDA 21 CFR 177.1520
Forms
  • Pellets
Processing Method
  • Extrusion Coating
  • Laminating
PhysicalNominal ValueUnitTest Method
Density 0.916g/cm³ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)12g/10 minASTM D1238
HardnessNominal ValueUnitTest Method
Durometer Hardness ASTM D2240
    Shore A 94
    Shore D 47
MechanicalNominal ValueUnitTest Method
Tensile Strength 1(Break)9.50MPaASTM D638
Tensile Elongation 2(Break)500%ASTM D638
Flexural Modulus - 1% Secant 202MPaASTM D790
ThermalNominal ValueUnitTest Method
Vicat Softening Temperature 89.0°CASTM D1525
ExtrusionNominal ValueUnit
Melt Temperature 280 to 320°C
Maximum Line Speed 7.6m/sec
Minimum Coating Thickness 35.0µm
Note Message
1 .Type IV, 50 mm/min
2 .Type IV, 50 mm/min
3 .3 lb/ream
Resin Grade Manufacturer Category Trademark
Ultramid® B3EG5 BASF Corporation Nylon 6 Ultramid®
Advanced Composites ADX-5028 Advanced Composites, Inc. PP, Unspecified Advanced Composites
LUVOCOM® 1105/WT106 Lehmann & Voss & Co. PEEK LUVOCOM®
SD POLYCA™ FD9082I02 Sumika Styron Polycarbonate Limited PC SD POLYCA™
Sumikon® PM-725 (Type: JZ Black) SBHPP Phenolic Sumikon®