Order Products : sales@su-jiao.com
Dryflex® T909
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | ELASTO |
| Trademark: | Dryflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lvnbnQ_Dryflex-T909.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dryflex T909: Thermoplastic Elastomer Material Type: TPS-SEBS Hardness 90 Shore A (4mm) Service Temperature Range: -50 -- +100 °C (unstressed material) Colour: Transparent, but can be available in any colour. Presentation: Free flowing pellets that can be processed without predrying, when stored under normal conditions. Weather Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic- and vegetable oils) Recyclability: 100% recyclable |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.890 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 4.00 mm) | 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ASTM D638 | ||
| 100% Secant | 8.00 | MPa | |
| 300% Secant | 9.00 | MPa | |
| Tensile Strength | 15.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 600 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 75.0 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature 1 | -50 to 100 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 140 to 200 | °C | |
| Middle Temperature | 140 to 200 | °C | |
| Front Temperature | 140 to 200 | °C | |
| Mold Temperature | 20.0 to 50.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 110 to 170 | °C | |
| Cylinder Zone 2 Temp. | 110 to 170 | °C | |
| Cylinder Zone 3 Temp. | 110 to 170 | °C | |
| Cylinder Zone 4 Temp. | 110 to 170 | °C | |
| Cylinder Zone 5 Temp. | 110 to 170 | °C |
| Note Message | |
|---|---|
| 1 . | Unstressed Material |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Matrixx 14N6020 | The Matrixx Group, Inc. | PP, Unspecified | Matrixx |
| Miflon® 2111B | Jiangsu Meilan Chemical Co., Ltd. | PTFE | Miflon® |
| TEREZ PA 6 7530 GF 10 MF 20 HY | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| EGYPTENE HD 5403 EA | Sidpec (Sidi Kerir Petrochemicals Co.) | HDPE | EGYPTENE |
| OLEFISTA™ QX0238C | Mitsubishi Chemical Performance Polymers, Inc. | Elastomer, Specialty | OLEFISTA™ |
