Order Products : sales@su-jiao.com
Pearlthane® CLEAR 15N70
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Pearlthane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lvc1CV_Pearlthane-CLEAR-15N70.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PEARLTHANE® CLEAR 15N70 is a polyether copolymer-based TPU with Shore 72 A hardness, free of plasticizer, supplied in form of translucent, colorless pellets with very low yellowness index. PEARLTHANE® CLEAR 15N70 combines low hardness and high elasticity with excellent mechanical properties and excellent hydrolysis resistance. It can be extruded and injection-molded. Pearlthane® CLEAR 15N70 when extruded is used for making films, tubing, profiles and a variety of technical parts. When processed by injection moulding, it can be used for making soft shoe soles and engineering technical parts. To improve the microbiological protection of PEARLTHANE® CLEAR 15N70, it is necessary to add a biocide, preferably in form of TPU-based masterbatch. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.07 | g/cm³ | ASTM D792 |
| 20°C | 1.07 | g/cm³ | ISO 2781 |
| Moisture Content | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 25.0 | mm³ | ISO 4649 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 72 | ASTM D2240, ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412, ISO 527 | ||
| 100% strain | 3.00 | MPa | ASTM D412, ISO 527 |
| 300% strain | 5.00 | MPa | ASTM D412, ISO 527 |
| Tensile Strength (Yield) | 30.0 | MPa | ASTM D412, ISO 527 |
| Tensile Elongation (Break) | 710 | % | ASTM D412, ISO 527 |
| Tear Strength | |||
| -- 1 | 65.0 | kN/m | ASTM D624 |
| -- | 65 | kN/m | ISO 34-1 |
| Compression Set | ASTM D395B | ||
| 23°C, 70 hr | 30 | % | ASTM D395B |
| 70°C, 24 hr | 60 | % | ASTM D395B |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature 2 | -53.0 | °C | ISO 11357-2 |
| Melting Temperature 3 | 168 - 178 | °C | Internal method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 - 110 | °C | |
| Drying Time | 1.0 - 2.0 | hr | |
| Rear Temperature | 180 | °C | |
| Middle Temperature | 190 | °C | |
| Front Temperature | 200 | °C | |
| Nozzle Temperature | 200 | °C | |
| Mold Temperature | 35.0 | °C | |
| Screw L/D Ratio | 23.0:1.0 |
| Injection instructions |
|---|
| Closing force: : 30 tonsScrew diameter: : 30 mmMaximum hydraulic pressure: 210 barMould: : Plaque 120x120x2 mmL/D ratio: :23 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 - 110 | °C | |
| Drying Time | 1.0 - 2.0 | hr | |
| Cylinder Zone 1 Temp. | 170 - 190 | °C | |
| Cylinder Zone 2 Temp. | 180 - 205 | °C | |
| Cylinder Zone 3 Temp. | 190 - 215 | °C | |
| Cylinder Zone 4 Temp. | 180 - 190 | °C | |
| Die Temperature | 185 - 190 | °C |
| Extrusion instructions |
|---|
| Extruder Speed: 12 to 60rpmExtrusion Compression Ratio: 2:1 to 3:1Extrusion L/D Ratio: 25:1 to 30:1 |
| Note Message | |
|---|---|
| 1 . | C mould |
| 2 . | 10°C /min |
| 3 . | Temperature at which MFI = 10 g/10 min @ 21.6 kg |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rainmaker Polypropylene MCCPTL20 | Rainmaker Polymers LLC | PP Copolymer | Rainmaker Polypropylene |
| REVODE 190 | Zhejiang Hisun Biomaterials Co.,Ltd | PLA | REVODE |
| Zhongfa PA6 BZR16 | Yuyao Zhongfa Engineering Plastics Co. Ltd. | Nylon 6 | Zhongfa |
| NOVAPOL® TF-Y826 Series | NOVA Chemicals | LLDPE | NOVAPOL® |
| LUVOCOM® 1-8756 | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
