Category: | Acetal (POM) Homopolymer , Acetal (POM) Homopolymer |
Manufacturer: | Generic |
Trademark: | Generic |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | lsizGs_Generic-Acetal-POM-Homopolymer---Carbon-Fiber.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
This data represents typical values that have been calculated from all products classified as: Generic Acetal (POM) Homopolymer - Carbon Fiber This information is provided for comparative purposes only. |
General Information | |
---|---|
Filler / Reinforcement |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 1.44 - 1.59 | g/cm³ | ASTM D792 |
Molding Shrinkage - Flow (23°C) | 0.20 - 0.70 | % | ASTM D955 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Flexural Modulus (23°C) | 6210 - 13800 | MPa | ASTM D790 |
Flexural Strength (23°C) | 110 - 111 | MPa | ASTM D790 |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Notched Izod Impact (23°C) | 43 - 54 | J/m | ASTM D256 |
Unnotched Izod Impact (23°C) | 270 - 430 | J/m | ASTM D256 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Deflection Temperature Under Load (1.8 MPa, Unannealed) | 151 - 171 | °C | ASTM D648 |
Injection | Nominal Value | Unit | |
---|---|---|---|
Mold Temperature | 93.3 - 96.1 | °C |
Injection instructions |
---|
This data represents typical values that have been calculated from all products classified as: Generic Acetal (POM) Homopolymer - Carbon FiberThis information is provided for comparative purposes only. |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
SCHULATEC® PEEK WR 30 GRTF NATURAL | A. Schulman Europe | PEEK | SCHULATEC® |
NAXALOY® 770 GF10 | MRC Polymers, Inc. | PC+ABS | NAXALOY® |
Axiall PVC 4441 | Axiall Corporation | PVC, Flexible | Axiall PVC |
ESPRENE EPDM 5206F | Sumitomo Chemical Co., Ltd. | EPDM | ESPRENE EPDM |
Cheng Yu SW30 | Cheng Yu Plastic Company Limited | Acetal (POM) Copolymer | Cheng Yu |