Order Products : sales@su-jiao.com

Tecnoflon® FOR 4353

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	lsZkpB_Tecnoflon-FOR-4353.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECNOFLON® FOR 4353 is a low viscosity cure incorporated fluoroelastomer copolymer. Tecnoflon® FOR 4353 is well suited for applications where excellent compression set and superior mold release are required. Some of the properties of Tecnoflon® FOR 4353 are: Excellent scorch safety Very Good mold flow Excellent mold release Lack of mold fouling FDA compliant TECNOFLON® FOR 4353 can be used for injection and transfer moulding of O-rings, gaskets and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers. The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods. TECNOFLON® FOR 4353 can be compounded using recommanded fillers in compliance with FDA regulations (see 21 CFR 177.2600, section V).

Message

TECNOFLON® FOR 4353 is a low viscosity cure incorporated fluoroelastomer copolymer. Tecnoflon® FOR 4353 is well suited for applications where excellent compression set and superior mold release are required.

Some of the properties of Tecnoflon® FOR 4353 are:

Excellent scorch safety

Very Good mold flow

Excellent mold release

Lack of mold fouling

FDA compliant

TECNOFLON® FOR 4353 can be used for injection and transfer moulding of O-rings, gaskets and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers.
The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
TECNOFLON® FOR 4353 can be compounded using recommanded fillers in compliance with FDA regulations (see 21 CFR 177.2600, section V).

General Information
Features	Copolymer Food Contact Acceptable Good Flow Good Mold Release Low Compression Set Low Viscosity
Uses	Belts/Belt Repair Blending Gaskets Hose Profiles Seals Sheet
Agency Ratings	FDA 21 CFR 177.2600
Appearance	Off-White
Forms	Slab
Processing Method	Calendering Compounding Extrusion Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	20	MU
Fluorine Content ²	66	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
tefabloc® TOSE 420	Mitsubishi Chemical Performance Polymers, Inc.	SEBS	tefabloc®
Thermoset Plastics SC-194	Thermoset, Lord Chemical Products	Silicone	Thermoset Plastics
ULTEM™ 1010FC resin	SABIC Innovative Plastics Europe	PEI	ULTEM™
Delta PPR-1G20	Delta Polymers	PP Homopolymer	Delta
LNP™ VERTON™ RX89047 compound	SABIC Innovative Plastics	Nylon 66	LNP™ VERTON™