Order Products : sales@su-jiao.com

Deco-Coat™ UV Cure 7156™

Category:	Epoxy , Epoxy; Epoxide
Manufacturer:	Epoxies, Etc.
Trademark:	Deco-Coat™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	log1kf_Deco-Coat-UV-Cure-7156-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
UV Cure 7155™ and 7156™ are low intensity UV Curable Epoxy Resins. These products are water clear and cure to a smooth, bubble free finish. Low cost, low intensity lights are all that is needed to cure these unique polymer systems. UV Cure 7155™ and 7156™ also have superior aging and yellowing resistance. Applications: UV Cure 7155™ and 7156™ may be used as decorative ultra clear doming resins on labels, pins, key fobs, magnets, ceramics, etc… UV Cure 7155™ and 7156™ have outstanding adhesion to photographic paper. Their high gloss finish and outstanding clarity will enhance any image it is applied over. These materials can also be used as protective coatings due to their ability to resist moisture, chemicals and thermal shock. Benefits: No weighing or mixing Single component Cures in minutes Non-solvent 100% solids system Can be cured with low intensity black light

Message

UV Cure 7155™ and 7156™ are low intensity UV Curable Epoxy Resins. These products are water clear and cure to a smooth, bubble free finish. Low cost, low intensity lights are all that is needed to cure these unique polymer systems. UV Cure 7155™ and 7156™ also have superior aging and yellowing resistance.

Applications:

UV Cure 7155™ and 7156™ may be used as decorative ultra clear doming resins on labels, pins, key fobs, magnets, ceramics, etc… UV Cure 7155™ and 7156™ have outstanding adhesion to photographic paper. Their high gloss finish and outstanding clarity will enhance any image it is applied over. These materials can also be used as protective coatings due to their ability to resist moisture, chemicals and thermal shock.

Benefits:

No weighing or mixing

Single component

Cures in minutes

Non-solvent 100% solids system

Can be cured with low intensity black light

General Information
Features	Good Adhesion Good Chemical Resistance Good Flexibility Good Thermal Shock Resistance High Clarity High Gloss Moisture Resistant UV Curable
Uses	Coating Applications Decorative Parts Labels
Appearance	Clear/Transparent

Uncured Properties	Nominal Value	Unit
Color	Clear/Transparent
Solids Content	100	%
Density (25°C)	1.09	g/cm³
Viscosity (25°C)	1.0	Pa·s
Shelf Life (4°C)	6	month

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	95
Tensile Strength	60.7	MPa
Tensile Elongation at Break	6.1	%
Relative Permittivity (60 Hz)	3.16
Volume Resistivity	1.6E+9	ohms·cm
Dissipation Factor (60 Hz)	0.018

Resin Grade	Manufacturer	Category	Trademark
NYCOA Polyamide 2176	Nycoa (Nylon Corporation of America)	Nylon+TPE	NYCOA Polyamide
Kafrit PEX TA 1108 HD	Kafrit NA Ltd.	XLPE	Kafrit PEX
Lupolen 4021 K RM	LyondellBasell Industries	MDPE	Lupolen
POLYblend PC/ABS 65FS GF10	Polykemi AB	PC+ABS	POLYblend
PENTAMID A GV35 HYD2 RC black	PENTAC Polymer GmbH	Nylon 66	PENTAMID A