Order Products : sales@su-jiao.com
Braskem PE GF4950HS
| Category: | HDPE Copolymer , High Density Polyethylene Copolymer |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | loG8L0_Braskem-PE-GF4950HS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GF4950HS is a High Density Polyethylene, copolymer, offering an outstanding combination of good processability and excellent stress cracking resistance (ESCR). It is recommended for the production of containers, flasks and bottles up to 30 liters for the transport of chemical products. Applications: Canisters from 2 to 20L for chemical products; Flasks for concentrated detergent. Others applications: Reservoir for wind shield wiper and air ducts. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.951 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.21 | g/10 min | |
| 190°C/21.6 kg | 20 | g/10 min | |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 50°C, 2.00 mm, 10% Igepal, Compression Molded, F50 | 150 | hr | |
| 50°C, 2.00 mm, 100% Igepal, Compression Molded, F50 | 480 | hr |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, Compression Molded) | 35.0 | MPa | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 1100 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 180 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded) | 70.0 | °C | ASTM D648 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Blow Molding Barrel Temperature | 180 to 190 | °C | |
| Blow Molding Die Temperature | 185 | °C | |
| Blow Molding Temperature - Feeding Zone | 180 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ULTEM™ 2200F resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| NEFTEKHIM PP 2641J (T31SE) | Nizhnekamskneftekhim Inc. | PP Homopolymer | NEFTEKHIM PP |
| ColorFast® FRPC100 | LTL Color Compounders, Inc. | PC | ColorFast® |
| EPO-TEK® OE132-43 | Epoxy Technology Inc. | PI, TS | EPO-TEK® |
| Plenco 06401 (Transfer) | Plastics Engineering Co. | Phenolic | Plenco |
