Order Products : sales@su-jiao.com
Mapex AN2720SB
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Ginar Technology Co., LTD. |
| Trademark: | Mapex |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lkywFf_Mapex-AN2720SB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Mapex AN2720SB PA6.6 is a 33 % glass fiber reinforced product for injection moulding in black colour |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.39 | g/cm³ | ASTM D792, ISO 1183 |
| Molding Shrinkage - Flow (1.60 mm) | 0.20 - 0.40 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 148 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 2.3 | % | ISO 527-2 |
| Flexural Modulus | 9310 | MPa | ISO 178 |
| Flexural Strength | 228 | MPa | ASTM D790, ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 240 | °C | ASTM D648, ISO 75-2/A |
| Melting Temperature | 250 | °C | DSC |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Additional Information |
|---|
| Notched Izod Impact Strength, ISO 180/1, 23°C, notch 0.25 in: 101 J/m |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 250 - 285 | °C | |
| Middle Temperature | 250 - 285 | °C | |
| Front Temperature | 250 - 285 | °C | |
| Nozzle Temperature | 265 - 275 | °C | |
| Mold Temperature | 30.0 - 100 | °C | |
| Injection Pressure | 50.0 - 120 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Holding Pressure | 30.0 - 80.0 | MPa | |
| Back Pressure | 0.00 - 0.300 | MPa | |
| Screw Speed | 60 - 100 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 66 GF 20 HI | Plastcom | Nylon 66 | SLOVAMID® 66 |
| ALCOM® PA66 910/1 GF15 PTFE10 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® PA66 |
| ELASTEL™ 1307-EI4-R1 | HELLENIC CABLES S.A. | EPDM | ELASTEL™ |
| POLYBEST 6 PD GK30 natural | POLYMA Kunststoff GmbH & Co. KG | Nylon 6 | POLYBEST |
| Adsyl 7624 XCP | LyondellBasell Industries | Polyolefin, Unspecified | Adsyl |
