Order Products : sales@su-jiao.com
Fluon® LM-ETFE 720AP
| Category: | ETFE , Ethylene Tetrafluoroethylene Copolymer |
| Manufacturer: | Asahi Glass Co., Ltd. |
| Trademark: | Fluon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lifgL5_Fluon-LM-ETFE-720AP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Fluon®LM-ETFE is a new fluororesin which combines the excellent heat resistant and mechanical properties of ETFE resin and the low melting point. Features:
|
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.78 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (297°C/5.0 kg) | 10 to 20 | g/10 min | ASTM D3159 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 43.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 380 | % | ASTM D638 |
| Flexural Modulus | 647 | MPa | ASTM D790 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Retention of Tensile Elongation | 120 | % | ASTM D638 |
| Retention of Tensile Strength | 90 | % | ASTM D638 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Weight Loss on Heating - 10% | 410 | °C | TGA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 225 | °C | DSC |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant | ASTM D150 | ||
| 1 kHz | 2.40 | ||
| 1 MHz | 2.40 | ||
| Dissipation Factor | ASTM D150 | ||
| 1 kHz | 7.0E-4 | ||
| 1 MHz | 8.2E-3 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 | |
| Oxygen Index | 40 | % | ASTM D2863 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAROMID A 280 G6 Y0 | Taro Plast S.p.A. | Nylon 66 | TAROMID A |
| Ultramid® A3WG7 BK23210 | BASF Corporation | Nylon 66 | Ultramid® |
| Chemlon® 66A | Teknor Apex Company (Chem Polymer) | Nylon 66 | Chemlon® |
| DENYL 6 1510 | Vamp Tech | Nylon 6 | DENYL |
| Expandable PS F32B | INEOS Styrenics International SA | PS (EPS) | Expandable PS |
