Order Products : sales@su-jiao.com
FORMION® FI 200HFU
| Category: | Ionomer , Ionomer |
| Manufacturer: | A. Schulman Inc. |
| Trademark: | FORMION® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | liU6X7_FORMION-FI-200HFU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Ionomer Nylon Alloy |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792A |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 16 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (72 hr, 3.20 mm) | 0.80 to 1.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, 22°C, 3.20 mm) | 95 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 22°C, 3.20 mm, Injection Molded) | 45.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 21°C, 4.00 mm, Injection Molded) | 250 | % | ASTM D638 |
| Flexural Modulus - Tangent 3(22°C, 3.20 mm, Injection Molded, 50.0 mm Span) | 1000 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (22°C, 3.20 mm) | No Break | ASTM D256A | |
| Multi-Axial Instrumented Impact Energy 4(3.20 mm, Injection Molded, Ductile Failure) | 45.0 | J | ISO 6603-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, 3.20 mm, Injection Molded) | 65.0 | °C | ASTM D648A |
| Note Message | |
|---|---|
| 1 . | Type I, 50 mm/min |
| 2 . | Type I, 50 mm/min |
| 3 . | Method I (3 point load), Type I, 50 mm/min |
| 4 . | 2.2 m/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Akulon® F126-C | DSM Engineering Plastics | Nylon 6 | Akulon® |
| KRATON® G1702 H | Kraton Polymers LLC | SEPS | KRATON® |
| InSphere® 1020F | Synthos S.A. | PS (EPS) | InSphere® |
| Sylvin 8707-84 Grey 9598 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| TOPAS® 5013L-10 | Topas Advanced Polymers, Inc. | COC | TOPAS® |
