Order Products : sales@su-jiao.com
Andur 8-6 APSLM/Curene® 442
| Category: | PUR-Ester/TDI , Polyurethane (Polyester, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | liENd7_Andur-8-6-APSLM-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 8-6APSLM is a polyester based liquid, toluene diisocyanate terminated prepolymer designed to remain liquid at room temperature. Elastomers with a Shore A durometer hardness of 84-87 can be obtained when Andur 8-6APSLM is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be prepared by curing Andur 8-6APSLM with various polyols, combinations of polyols and Curene 442, other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.22 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 84 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 5.14 | MPa | ASTM D412 |
| 300% strain | 8.45 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 53.5 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 640 | % | ASTM D412 |
| Compression Set | 25 | % | ASTM D395B |
| Bayshore Resilience | 30 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 6.0 | min | |
| Demold Time | 30 | min | |
| Post Cure Time | |||
| 22°C | 72 | hr | |
| 99°C | 16 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore A: 82 to 86Die C Tear, ASTM D1004: 415 pliAverage Split Tear, ASTM D1938: 220 pliStoichiometry Curative Level: 95%Grams Curene 442 per 100 grams Andur 8 to 6 APSLM: 10.6Mix Temperature: Andur 8-6 APSLM: 190°F Curene 442: 235°F |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 107 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 300 MG 20 EM | RTP Company | PC | RTP |
| Sylvin 9446-85 Natural | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| Cri-Line GP-918 | Cri-Tech, Inc. | Fluorelastomer | Cri-Line |
| Infino HA-1011 | SAMSUNG SDI CO., LTD. | PC+ABS | Infino |
| RONFALIN® ABS 1335 | A. Schulman Europe | ABS | RONFALIN® |
