Order Products : sales@su-jiao.com
Advanced Composites ADX-5007
| Category: | TPO , Compounded Polypropylene |
| Manufacturer: | Advanced Composites, Inc. |
| Trademark: | Advanced Composites |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | leTlH0_Advanced-Composites-ADX-5007.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Advanced Composites ADX-5007 is a composite polypropylene product, which contains talc filler. It is available in North America. Features include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 13 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.00 mm) | 0.90 - 1.1 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 61 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 24.1 | MPa | ASTM D638 |
| Flexural Modulus | 2120 | MPa | ASTM D790, ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C | 39 | J/m | ASTM D256 |
| 23°C | 480 | J/m | ASTM D256 |
| Instrumented Dart Impact 1(-30°C, Totol Energy) | 20.5 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 127 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | < 2.0 | hr | |
| Rear Temperature | 193 | °C | |
| Middle Temperature | 210 | °C | |
| Front Temperature | 216 | °C | |
| Nozzle Temperature | 210 | °C | |
| Processing (Melt) Temp | 193 - 249 | °C | |
| Mold Temperature | 48.9 - 60.0 | °C | |
| Injection Rate | Slow-Moderate | ||
| Cushion | 6.35 - 12.7 | mm |
| Injection instructions |
|---|
| Injection Pressure: The preferred range is 50 to 60% of machine capacity |
| Note Message | |
|---|---|
| 1 . | 6.70 m/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Huafon JF-D-C8903 | Huafon Group Co., Ltd. | PUR, Unspecified | Huafon |
| O'Tech OM 5531 | O'Tech Corporation | PVC, Unspecified | O'Tech |
| apilon 52® D-40L | API SpA | TPU-Polyester | apilon 52® |
| ULTEM™ HU1000 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| SABIC® PC PC1800 resin | SABIC Innovative Plastics Asia Pacific | PC | SABIC® PC |
