Order Products : sales@su-jiao.com
PermaStat® 1200-70A
| Category: | TPU, Unspecified , Thermoplastic Polyurethane Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | PermaStat® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | leLxgM_PermaStat-1200-70A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.06 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 70 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 10.3 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 1500 | % | ASTM D412 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 9.9E+11 | ohms | ASTM D257 |
| Volume Resistivity | 9.9E+10 | ohms·cm | ASTM D257 |
| Additional Information |
|---|
| Dew Point: 0°FStatic Decay, FTMS101C 4046.1, MIL-PRF-81705D, 5kV to 50 V, 12% RH: <2 secSurface Resistance, ESD S11.11: 1E09 to 9.9E10 ohmSurface Resistivity, ASTM D257: 1E10 to 9.9E11 ohm/sqVolume Resistivity, ASTM D257: 1E09 to 9.9E10 ohm-cm |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 107 | °C | |
| Drying Time | 6.0 | hr | |
| Suggested Max Moisture | 0.030 | % | |
| Processing (Melt) Temp | 177 - 216 | °C | |
| Mold Temperature | 15.6 - 65.6 | °C | |
| Injection Pressure | 48.3 - 82.7 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required.Do not exceed 520 °F (270 °C) melt temperature. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P2620 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| SCANAMID 6 B11^ F45 | Polykemi AB | Nylon 6 | SCANAMID 6 |
| Tufpet PBT G2810 | Mitsubishi Rayon America Inc. | PBT | Tufpet |
| Novalloy-S S4100 (Type V) | Daicel Polymer Ltd. | PC+ABS | Novalloy-S |
| LNP™ THERMOCOMP™ RFZ349XC compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
