Order Products : sales@su-jiao.com

Udel® GF-120

Category:	PSU , Polysulfone
Manufacturer:	Solvay Specialty Polymers
Trademark:	Udel®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	layPec_Udel-GF-120.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Udel® GF-120, resin is a 20% glass fiber reinforced polysulfone compound. Glass fiber substantially increases the rigidity, tensile strength, creep resistance, dimensional stability and chemical resistance of the polysulfone resin. The high performance properties and attractive price make these resins particularly effective alternatives to metals in many engineering applications.

Black: Udel® GF-120 Bk 937

Black: Udel® GF-120 BK 937

Natural: Udel® GF-120 NT 20

Grey: Udel® GF-120 GY 1234

General Information
Filler / Reinforcement	Glass Fiber
Features	Acid Resistant Alcohol Resistant Alkali Resistant Autoclave Sterilizable E-beam Sterilizable Ethylene Oxide Sterilizable Food Contact Acceptable Good Chemical Resistance Good Creep Resistance Good Dimensional Stability Good Sterilizability Good Strength Heat Sterilizable High Heat Resistance High Rigidity Hydrocarbon Resistant Hydrolytically Stable Radiation (Gamma) Resistant Radiation Sterilizable Radiotranslucent Steam Resistant Steam Sterilizable
Uses	Appliance Components Appliances Automotive Electronics Bobbins Dental Applications Electrical Parts Electrical/Electronic Applications Fittings Food Service Applications Hospital Goods Industrial Parts Medical Devices Medical/Healthcare Applications Microwave Cookware Piping Plumbing Parts Surgical Instruments Valves/Valve Parts
Agency Ratings	ISO 10993 ISO 10993-Part 1 NSF 51 3 NSF 61 4
RoHS Compliance	RoHS Compliant
Appearance	Black Grey Natural Color Opaque
Forms	Pellets
Processing Method	Extrusion Injection Molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.40	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (343°C/2.16 kg)	6.5	g/10 min	ASTM D1238
Molding Shrinkage - Flow	0.30	%	ASTM D955

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	6000	MPa	ASTM D638
Tensile Strength	96.5	MPa	ASTM D638
Tensile Elongation (Break)	3.0	%	ASTM D638
Flexural Modulus	5520	MPa	ASTM D790
Flexural Strength	148	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	53	J/m	ASTM D256
Tensile Impact Strength	109	kJ/m²	ASTM D1822

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	180	°C	ASTM D648

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	2.0E+16	ohms·cm	ASTM D257
Dielectric Strength	19	kV/mm	ASTM D149
Dielectric Constant			ASTM D150
60 Hz	3.31
1 MHz	3.28
Dissipation Factor			ASTM D150
60 Hz	8.0E-3
1 MHz	6.0E-3

Flammability	Nominal Value	Unit	Test Method
Flame Rating ¹(3.18 mm)	HB		UL 94

Injection	Nominal Value	Unit
Drying Temperature	149 to 163	°C
Drying Time	3.0 to 4.0	hr
Processing (Melt) Temp	343 to 399	°C
Mold Temperature	121 to 163	°C
Injection Rate	Fast
Back Pressure	0.345 to 0.689	MPa
Screw Compression Ratio	2.0:1.0

Note Message
1 .	These flammability ratings are not intended to reflect hazards presented by these or any other materials under actual fire conditions.

Resin Grade	Manufacturer	Category	Trademark
VICTREX® PAEK WG™ 101	Victrex plc	PAEK	VICTREX® PAEK
TOTAL Polyethylene EVA 1005 VN 4	TOTAL Refining & Chemicals	EVA	TOTAL Polyethylene
Braskem PP FT120WV	Braskem America Inc.	PP Homopolymer	Braskem PP
Eltex® P KS341	INEOS Olefins & Polymers Europe	PP Random Copolymer	Eltex® P
HiFill FR® PA6/6 GF20 FR-NR	Techmer Engineered Solutions	Nylon 66	HiFill FR®