Order Products : sales@su-jiao.com
SureSpec HP-040
| Category: | PP, HMS , High Melt Strength Polypropylene |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lZVI2R_SureSpec-HP-040.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HP-040 is a Polypropylene certified prime grade designed for extrusion of profile and cast film applications. HP-040 combines excellent processability and high degree of thermal stabilization, with good melt strength, high tensile strength and good fibrillation tendency. HP-040 recommended processing temperature is between 210° to 230°C. HP-040 complies with FDA regulation 21CFR 177.1520 and with most international regulations concerning the use of Polypropylene in contact with food. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.905 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 4.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 91 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 35.2 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield) | 11 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3 | 1720 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 43 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 98.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 151 | °C | ASTM D1525 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 210 to 230 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 66 GF 30 FRA 3 | Plastcom | Nylon 66 | SLOVAMID® 66 |
| BESTNYL SI00VI01BS08 | Triesa Plastics | Nylon 6 | BESTNYL |
| HiFill® PA6 GF35 HS L | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| Jackdaw PC DS20WT6701 | Jackdaw Polymers | PC+PBT | Jackdaw PC |
| Honghai CPE 140B | Weifang Honghai Plastics Technology Co., Ltd. | CPE | Honghai |
