Order Products : sales@su-jiao.com
Fibremod™ WE380HP
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Borealis AG |
| Trademark: | Fibremod™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lWh1go_Fibremod-WE380HP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Fibremod WE380HP is a high performance hybrid reinforced (20% glass fibre / 10% mineral) copolypropylene compound intended for injection moulding. This material has an excellent balance between impact strength and stiffness combined with outstanding processability. The product is available in standard black 9502. The product is available in natural colour. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.13 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 13 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.20 - 0.80 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (1.00 mm) | 4950 | MPa | ISO 527-2 |
| Tensile Stress | 65.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 6.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20°C | 10 | kJ/m² | ISO 179/1eA |
| 23°C | 16 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 50 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 149 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 138 | °C | ISO 75-2/A |
| CLTE - Flow (-30 to 80°C) | 4.0E-5 | cm/cm/°C | Internal method |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Fogging | mg | DIN 75201 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Emission | µgC/g | VDA 277 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 30.0 - 50.0 | °C | |
| Holding Pressure | 30.0 - 60.0 | MPa |
| Injection instructions |
|---|
| Feeding Temperatrue: 40 - 80 °CMass Temperature: 220 - 260 °CBack Pressure: Low to MediumScrew Speed: Low to MediumFlow Front Speed: 100 - 200 mm/s |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PROTEQ™ H15SQ9 | Marplex Australia Pty. Ltd. | PP Homopolymer | PROTEQ™ |
| RTP 3400 G-930 | RTP Company | LCP | RTP |
| RTP 107 CC UV | RTP Company | PP, Unspecified | RTP |
| Spartech Polycom PP6230 B86 | Spartech Polycom | PP, Unspecified | Spartech |
| VITAMIDE® AW10BK6612 | Jackdaw Polymers | Nylon 66 | VITAMIDE® |
