Sarlink® TPE EE-1185B (PRELIMINARY DATA) Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
The Sarlink EE-1100 Series is a general purpose thermoplastic elastomer series, available in BLK, designed for demanding automotive extrusion applications including backbone for window encapsulation. Sarlink EE-1185B is a higher hardness, high density grade with low CLTE, good chemical resistance and elastic performance.

General Information
Features	High specific gravity High density Equilibrium rigidity/toughness Good UV resistance Workability, good Good adhesion Good chemical resistance High hardness Elastic
Uses	Car window package Application in Automobile Field Automotive exterior parts Rubber substitution Profile
RoHS Compliance	RoHS compliance
Appearance	Black
Forms	Particle
Processing Method	Co-extrusion molding Extrusion

Physical	Nominal Value	Unit	Test Method
Density	1.14	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 5 sec, Injection Molded)	83		ISO 868

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress - Across Flow (100% Strain)	3.21	MPa	ISO 37
Tensile Strength - Across Flow (Break)	10.0	MPa	ISO 37
Tensile Elongation - Across Flow (Break)	720	%	ISO 37
Tear Strength ¹	42.5	kN/m	ISO 34

Fill Analysis	Nominal Value	Unit	Test Method
Apparent Viscosity (200°C, 206 sec^-1)	259	Pa·s	ISO 11443

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	171 - 193	°C
Cylinder Zone 2 Temp.	177 - 199	°C
Cylinder Zone 3 Temp.	182 - 204	°C
Cylinder Zone 4 Temp.	182 - 204	°C
Cylinder Zone 5 Temp.	188 - 204	°C
Die Temperature	188 - 204	°C

Extrusion instructions
Screw Speed: 30 to 100 rpm

Note Message
1 .	500 mm/min

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Sarlink® TPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	lSGMoH_SarlinkTPEEE1185BPRELIMINARYDATA.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Makropol® PC B3 HF UV CRLA010 PC306	Petropol Industry and Trade of Polymers LTDA	PC	Makropol® PC
SABIC® LDPE 2004TX37	Saudi Basic Industries Corporation (SABIC)	LDPE	SABIC® LDPE
TAISOX 9003	Formosa Plastics Corporation	HDPE	TAISOX
TIPPLEN® K 691	MOL Petrochemicals Co. Ltd.	PP Impact Copolymer	TIPPLEN®
Polaris™ MR 80499-18	Ashland Performance Materials	Polyester, TS	Polaris™