Order Products : sales@su-jiao.com
Braskem PE IC 32
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lPfCDC_Braskem-PE-IC-32.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Description: IC32 is a linear low-density polyethylene, narrow molecular weight butene-1 copolymer, produced by solution process, for injection molding. It offers good fluidity, excellent flexibility, tenacity and low warpage. It contains special antioxidant additives. Application: Resin has been specifically developed for lids molding injection, house appliances and master batch production. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.924 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 29 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 2.00 mm, 10% Igepal, Compression Molded, F50) | < 1.00 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, molding | 12.0 | MPa | ASTM D638 |
| Fracture, molding | 10.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, Compression Molded) | 250 | % | ASTM D638 |
| Apparent Bending Modulus | 320 | MPa | ASTM D747 |
| Flexural Modulus - 1% Secant (Compression Molded) | 370 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 95.0 | °C | ASTM D1525 1 |
| Additional Information |
|---|
| The IC32 resin has been developed to be used in injection molding, in similar conditions to the other Linear Low Density Polyethylene of similar fluidity. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 150 - 200 | °C |
| Note Message | |
|---|---|
| 1 . | 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYSTONE® Marine-Tec | Röchling Engineering Plastics SE & Co. KG | TP, Unspecified | POLYSTONE® |
| ARK 2150-60A | Arkadia Plastics, Inc. | TPU-Polyester | ARK |
| Axiall PVC 4510 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| Cri-Line FDA-615 | Cri-Tech, Inc. | Fluorelastomer | Cri-Line |
| EVAL™ SP292 | Kuraray Co., Ltd. | EVOH | EVAL™ |
